Dallas Industries delivered a feed line to Grant Industries.

Dallas Industries, Troy, Mich., a manufacturer of coil handling and press feeding equipment and controls for the stamping industry, has delivered a feed line to Grant Industries, a stamping and assembly manufacturer in Fraser, Mich.

The automated, conventional coil feed line is rated for materials up to 50,000 lbs. by 54 in. wide and is equipped with a 6-in.-dia. roll feed with servo pilot adjustment. This enables the operator to adjust the pilot release gap while maintaining the ability to adjust roll pressure when running a thin, surface-critical material.

The line also incorporates a nine-roll straightener with automated straightener roll position, a tailout feature to run the feeder in automatic mode while loading reel, and a powered straightener material calculator to assist with determining brake roll adjustment.

STAMPING Journal is the only industrial publication dedicated solely to serving the needs of the metal stamping market. Since 1989 the publication has been dedicated to covering the cutting-edge technologies, industry trends, best practices, and news that help stamping professionals run their businesses more efficiently.

Easily access valuable industry resources now with full access to the digital edition of The FABRICATOR.

Easily access valuable industry resources now with full access to the digital edition of The WELDER.

Easily access valuable industry resources now with full access to the digital edition of The Tube & Pipe Journal.

Enjoy full access to the digital edition of STAMPING Journal, which serves the metal stamping market with the latest technology advancements, best practices, and industry news.

Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.

© 2022 FMA Communications, Inc. All rights reserved.

Not yet registered? Sign up