160 tons Obi dry clutch C type mechanical press

Manufacturing Precision Standards : Japanese JIS 1 Class1. Parameters NameUnitXPC-110XPC-160XPC-200XPC-250Model VHVHVHVHCapacityTon110160200250Rated tonnage pointmm53636373.5Strokemm180110200130250150280170Stable speeds.p.m35-6550-10030-5540-8525-4535-7020-3530-60Die heightmm400435450485500550550605Slide adjustmentmm10

Featured Products

Manufacturing Precision Standards : Japanese JIS 1 Class

1. Parameters
 
NameUnitXPC-110XPC-160XPC-200XPC-250
Model VHVHVHVH
CapacityTon110160200250
Rated tonnage pointmm53636373.5
Strokemm180110200130250150280170
Stable speeds.p.m35-6550-10030-5540-8525-4535-7020-3530-60
Die heightmm400435450485500550550605
Slide adjustmentmm100100120120
Bolster areamm1800 x 650 x 1302000 x 760 x 1502400 x 340 x 1702700 x 900 x 170
Slide areamm1400 x 500 x 701600 x 550 x 701850 x 650 x 952100 x 700 x 95
Main motorkwxP11 x 415 x 418.5 x 422 x 4
Presses weightTon14.22027.545.5
Air pressurekg/cm25555
Presses precision JIS(CNS) I class 
Die cushion capacity Two plate  Double cylinders 
CapacityTon3.6 x 26.3 x 210 x 214 x 2
Air pressurekg/cm26666
Strokemm707080100
Die cushion work part dimensionmm2350 x 235 x 2 Group410 x 260 x 2 Group540 x 350 x 2 Group640 x 470 x 2 Group


Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Machine adopts high-alloy-steel, two-bent-axle, and two- wide work center, to optimize design.
* In order to guarantee relative stationarity of machine operation, it is necessary to equip with two balancers.
* Moulding-adjustment precision is as high as 0.1 mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
 
Standard Configuration:
* Dry clutch brake
* Standard operating system of xieduan
* Operation Choice/cutting/inch stroke /safe journey/continuation of operating mode
* Oil pressure overload protection device
* Over-run safety device
* Duplex magnetic valve
* Misfeed detection consent
* Electric slider adjusting device
* Digital moulding-height indicator (unit: 0.1 mm)
* Electric butter lubricating device
* Accumulative counter (6 digits)
* Pre-determined counter (6 digits)
* Maintenance counter (6 digits)
* Life counter (6 digits)
* Electronic rotatry cam switch (6 connections)
* Air-blast device 1/2" primary circuit
* Air source connector 1/2" secondary circuit
* Error inspection socket
* Power socket (only apply to single-phase 110V power)
 
Optional Configuration:
* Wet clutch brake
* Die cushion device
* Vs variable-speed motor
* Touch-screen device
* Photo-electric safety device
* Knock-out Device of ram
* Main motor inversion device
* Foot switch
* Safety dog and safety latch
* T-type two-hand button operating platform
* Inspection variable-connection magnetic valve
* Anti-vibration mechanical foot
* Rapid tooling exchange
* Upper die clamper
* Lower die clamper
* Die lifter
* Mould-shift arm
* Basic bolt and soleplate
* Automatic feeder device
* Three-in-one NC straightening feeder
* NC Roll feeder
* Two-in-one feeder and straightening machine
* Leveller

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours