Product description of chute feeder
The chute feeder could feed the lump material from hopper to receiving device,it is widely used in the industry of the metallurgy,mining,chemical,construction, coal and so on,it is always feeding for crushing for coarse size material (raw ore etc),It is applicable to transport in short distance for metal,non-metallic material,but it is suitable for concentrates power and other power materials.
Working principle of chute feeder
The machine is usually installed underneath the discharging opening of ore bin. Minerals fall on the bushing. The bushing is located at the chute bottom, configured on idler wheel and via eccentric device connected with reducer which is linked to electric motor by coupler. When it works, electric motor drives reducer via coupler; eccentric disk and drain cap which is situated between chute frame bottom and roller begin to do reciprocal and linear motion so as to uniformly feed minerals.
Application of chute feeder
The chute Feeder is used to convey mineral lump from storage silo to equipment in industries like smelting, mining, chemical, building material, concentrating and coal, etc.
Features of chute feeder
The chute feeder can be installed on the ground or hoisted on the discharge port of ore bin. The chute bottom plates do the reciprocating movement. Stroke can be adjusted by the eccentric wheel; the eccentric throw is half as big as the stroke. According to experience of some mine sites, the eccentric throw should be no less than 30mm for cohesive ore. The chute width is 2-2.5 times bigger than the maximum feeding granularity. The biggest chute feeder can supply ore with granularity less than 500mm.
Structure of Mine chute feeder
Technical parameters of chute feeder
Specification and type
| Output size | Swinging times (c/m) | Swinging range (mm) | Max feeding size (mm) | Capacity (t/h) | Rotating Motor | ||
Width | Height | Type | Power (kw) | |||||
400x400 | 400 | 400 | 28 | 20-50 | 100 | 2.5-3 | Y112M-6 | 2.2 |
600×500 | 600 | 500 | 30 | 20-50 | 200 | 5-10 | Y132M-6 | 4 |
980×1200 | 900 | 700 | 25 | 20-50 | 250 | 20-40 | Y160M-6 | 7.5 |
800×0700 | 750 | 600 | 25 | 20-50 | 250 | 30-50 | Y132M-6 | 5.5 |
Our service1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment, draft the construction scheme and detailed process, and complete process of export
3) After-sales service: Offer considerate technical guidance in installation, debugging and operators training. We are available at any time if you need.
Company Information
Victor is a large mineral processing manufacturer for 15 years history, with covering an area of 48,000 square meters and 20,000 square meters for workshop, with various large modernized machinery facilities, professional R&D team and installation team.
With 32% market share in China and the rest to overseas, already successfully exported to over 50 countries, such as USA, England, Australia, Brazil, Turkey, Italy, Russia, South Africa, Zimbabwe, Sudan, Ghana, Congo, Morocco, India,Indonesia, Malaysia, Philippines, North Korea, Mongolia, Vietnam, Thailand etc.
Our goal is to provide one-stop service for you and assist you to solve all problems from investment to his return in the field of mining, including the preliminary mineral analysis, mineral processing test, engineering design, equipment debugging and technical training etc..
We are expert especially at mining separating and lab mining plant, main products as below:
Gold trommel wash plant
Shaking table
Spiral chute separator
Centrifugal gold concentrator
Jig separator machines
Waste recycling machine
Grinding and mill crusher
Flotation cell machine
Magnetic separator
Laboratory mining plant
Contact
Maja Liu
Mob.: +86 133-6177-9811