Semi-closed H-type power press 160 tons

Manufacturing Precision Standards : Japanese JIS 1 Class1. Parameters1.1 80ton-160ton NameUnit XPD-80XPD-110XPD-160Model VHVHVHCapacityTon80110160Rated tonnage pointmm426363Strokemm150701808020090Die heightmm340380360410460510Stroke per minutes.p.m35-8080-12030-60 60-9020-5040-70Slide adjustmentmm8080100Slide

Featured Products

Manufacturing Precision Standards : Japanese JIS 1 Class

1. Parameters

1.1 80ton-160ton
 
NameUnit XPD-80XPD-110XPD-160
Model VHVHVH
CapacityTon80110160
Rated tonnage pointmm426363
Strokemm150701808020090
Die heightmm340380360410460510
Stroke per minutes.p.m35-8080-12030-60 60-9020-5040-70
Slide adjustmentmm8080100
Slide areamm560x420x70650x470x80700x550x90
Bolster areamm760x550x90900x600x110980x880x140
Main motorkwxp7.5x411x415x4
Slide adjust deviceHP Electrical driving
Air pressurekg/cm2666
Presses dimensionmm1300x1890x30001420x1985x32001600x2200x3500
Presses weightTon7.810.517.8
Presses precision GB(JIS)1 class 
Die cushion capacityTon3.66.310
Strokemm708080
Die cushion effective areamm2450x310500x350650x420

1.2 200ton-315ton
 
NameUnit XPD-200XPD-260XPD-315
Model VHVHVH
CapacityTon200260315
Rated tonnage pointmm6373.573.5
Strokemm200100250150280170
Die heightmm460510500550550600
Stroke per minutes.p.m20-50 50-7020-4040-5020-35 30-50
Slide adjustmentmm110120120
Slide areamm850x630x90950x700x1001000x750x110
Bolster areamm1140x820x1601500x840x1801600x900x200
Main motorkwxp18x422x430x4
Slide adjust deviceHP Electrical driving
Air pressurekg/cm2666
Presses dimensionmm1750x2500x39002080x2895x44702100x2925x4550
Presses weightTon25.33742
Presses precision GB(JIS)7 class
Die cushion capacityTon141414
Strokemm100100100
Die cushion effective areamm2710x480810x480810x480

Product Features:
* With high rigidity rack design, they are welded with the use of high-quality steel plates, through relieving of internal stresses, so that stability and reliability of the whole machine in precision are enhanced.
* Consistent driving center and machine center to guarantee accurate and stable punching.
* In order to guarantee relative stationarity of machine operation, it is equipped with two balancers.
* Moulding-adjustment precision is as high as 0.1mm, safe, speedy, and reliable.
* Through hard oxidation and grinding, such parts as bent axles, gear sets, and connecting rods possess higher combination property and tolerance.
* Adopt highly sensitive and reliable clutch/brake and internationally top duplex magnetic valve, as well as overload protection devices, to guarantee precision and safety for operation and stop of press rams.
* Machine's structural design shall be reasonable, for the convenience of realizing automatic production, reducing cost, and improving efficiency.
* Possess advanced design concepts, low noise, low consumption, and energy saving.
 
Standard Configuration:
* Inverter
* Hydraulic overload protector
* Electric slider adjusting device
* Electric moulding-height indicator
* Slider and mould balancing device
* Misfeed detection consent
* Power socket
* Rotary cam switch
* Crank angle indicator
* Counter
* Air source connector
* Over-run safety device
* Maintenance tool and tool box
* Operating manual
 
Optional Configuration:
* Auto grease pump device
* Air die cushion device
* Preset counter
* Preset counter
* Foot switch
* Quick die change device (Die lifter, die clamper, or mould-shift arm)
* Knock out device on the slider
* Anti-vibration foot
* Photo-electric safety device
* Feeder (air, machinery, NC,and servo )
* Feeding rack
* Leveller
* Manipulator (Bar Feeder )
* Die Room Light
* Left (right) feeding device
* PAC100 control system
* Man-machine control system
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours