Equipment operating environment:
Use environment: -10 ° C +45 ° C
Relative humidity: ≤95%
Working environment power supply:
(4) air pressure: 0.5mpa
(5) equipment power: about 45Kw
6 production flow: from left to right (according to customer requirements)
Suitable for material parameters
Material: cold-rolled sheet, pickling sheet, galvanized sheet, stainless steel sheet, aluminum alloy hot rolled sheet
(2) material surface treatment: no treatment
Material thickness: 0.6-6.0mm (please refer to the material correction capacity list)
Material broadband: 150-1300mm
Yield strength: ≤980N/mm
6 tensile strength: ≤1568N/mm
7 coil diameter: 480-520mm
Outer diameter: 1400mm
Quality of liner: 10000Kg
Project name brand remarks
1 deceleration motor Taiwan wanxin
2 servomotor yaskawa/mitsubishi, Japan
Touch screen Taiwan whalen
PLC programmable controller mitsubishi, Japan
5 circuit breaker Fuji/mitsubishi Japan
6 contactor Fuji Japan
7. Control button hequan Japan
Relay 8 Japan hoquan
Pneumatic components Taiwan yade
10 hydraulic station dongguan jinzhuang/dongguan guangyin
Photoelectric induction dao chuan
12 cylinder Taiwan yade
13 leveling bearing Japan NSK/NTN
14 inverter mitsubishi, Japan
15 servo drive yaskawa/mitsubishi, Japan
16. Rack motor Taiwan east dollar
Equipment parameter list
Notes on project unit parameters
Material width mm 150-1300mm
Material thickness mm 0.6-6.0mm
The maximum weight of aniseed is 10000kg
The inner diameter of the material coil is 480-520mm
The outer diameter of the material coil is mm 800-1400mm
There are 10 branches of the straightening roller, with a diameter of 85MM at the top and bottom of 5
There are 2 feeding roller branches, with the diameter of the upper 1 and the lower 1 being 120MM
There are 2 feeding roller branches, with the diameter of the upper 1 and the lower 1 being 120MM
Correction accuracy mm/m 1.5
Air pressure Mpa 0.5
AC11KW (two stage drive)
Rack motor kw 5.5 kw
Feeding line height mm customer requirements ±100 important parameters, the customer fill in.
Feeding accuracy mm 0-1000 ±0.2, 1000 + ±0.3 in the case of the mold with a guide pin
The expansion of the scope of mm Φ 480 - Φ 520 mm
Expansion mode hydraulic connecting rod type
Feeding direction left → right important parameters, the customer fill in.
Use of materials hot - rolled plate cold - rolled plate, pickling plate, stainless steel plate aluminum alloy
Machine color by type (main machine meter white ripple) protective parts and moving parts orange